Total Pageviews

Showing posts with label keyboard. Show all posts
Showing posts with label keyboard. Show all posts

Tuesday, May 31, 2016

Arduino alarm system with delay (2)


   In this article I put a keyboard for activate and deactivate a alarms system with Arduino board and PIR sensor.
   My schematic is:
and sketch is alarm_system_2a.ino !
   My alarm work in next steps:
- after power on, alarm is OFF, blue led is on
- after you introduce the code (1234* or better #1234* because # clear buffer for old activity) system go to stand-by state, green led is blinking;
- after 20 seconds, system is in waitting (watching) mode, green led is permanent on;
- if PIR sensor detect movement, system begin to countdown, red led flash;
- if you indroduce code, system will be off (blue led in on)
- after 10 seconds (if you not enter the code) buzzer is on (led onboard is on), red led is permanet on
- after 10 seconds, system go to waitting mode, if is movement again, countdown and after buzzer is on, etc;
   You can see 2 movies with states of this alarm system: