Total Pageviews

Showing posts with label undervoltage relay. Show all posts
Showing posts with label undervoltage relay. Show all posts

Monday, October 3, 2016

Under & overvoltage relay for AC main power supply (2)

   After I test the Measuring AC Voltage with an AC to AC power adapter from OpenEnergyMonitor and put my result on article Measuring AC Main Supply Voltage with Arduino (2) and after I made Under & overvoltage relay for AC main power supply now I change schematic for made a new version for voltage protection relay using this schematic
   If I use main_supply_emonlib_under_overvoltage_ver3.ino sketch after module is powered, on display I see the voltage on main power supply:
and after I push MENU/OK button, on display is undervoltage thereshold, who cand change with + & - buttons:
    After I push MENU button, value is stored in EEPROM memory, on display is overvoltage thereshold, who can be change by + & - buttons:
after push again MENU button, value is stored in EEPROM memory, on display is delay-off tine in second for reconnect coil relay after voltage inoutside range:
   In under & overvoltage relay with Arduino (2) movie you cand see the cases and how you cand cheange value for undervoltage, overvoltage and delay-off time:
   If I use main_supply_emonlib_under_overvoltage_ver3c.ino value for main power supply is displayed with a number after comma (point), exactly as in under & overvoltage relay with Arduino (3) movie:

31.07.2020
   I added a sketch to use LCD1602 alphanumerica display on i2c connexion instead existing display (with MAX7219 and 7-segment led display). Sketch is main_supply_emonlib_under_overvoltage_ver4.ino !

02.08.2020
   I added a new sketch with best implement of delay-on to connect the relay... see main_supply_emonlib_under_overvoltage_ver4a.ino

Under & overvoltage relay for AC main power supply

   After I made a test for Measuring AC Main Supply Voltage with Arduino, now I change the sketch for made protection relay with adjustable limits for undervoltage, overvoltage and delay-off time using 3 buttons:
   After power the module, Arduino read and calculate vltage for AC main power supply and if is ok, coil relay is powered:
   If push MENU/OK button, on display is SET
after 2-3 seconds, on display is undervoltage threshold, who cand change using + & - buttons:
    After you push MENU/OK button, is displayed overvoltage thereshold, who cand change using + & - buttons:
   After you pus MENU/OK buttons on display is delay-off time for reconnect coil relay after voltage is outside good range, also you can change value form 1 tp 20 seconds using + & - buttons:
    After you push MENU/OK button, on display is main voltage:
   I write main_voltage_3.ino sketch who made exactlly in picture, but it more easy to understund cases if you see under & overvoltage relay with Arduino movie

Bibliography: